Need Assistance? 1.855.849.4328
Shipping $9.99 Flat Rate Shipping
Home > Dual Wall Adhesive Heat Shrink > 6:1 Dual Wall Adhesive Military Grade Heat Shrink

Dual Wall Adhesive Heat Shrink
6:1 Dual Wall Adhesive Military Grade Heat Shrink
What's special about this heat shrink tubing?
  • Very high shrink ratio accommodates large connectors and bulky cables.
  • Lined with a hot melt adhesive for extra protection.
  • Conforms to UL94V-0 Standards of flammability and MIL-DTL-23053/15, Class 1 specifications for adhesive lined heat shrink tubing

http://www.heatshrinksupplies.com6-1-dual-wall-adhesive-heat-shrink.html
$24.31
6:1 Dual Wall Adhesive Military Grade Heat Shrink

6:1 Dual Wall Adhesive Military Grade Heat Shrink

6:1 High Ratio Heat Shrink Tubing is able to slip over large connectors and provide a tight, weatherproof seal over your cables.
What's special about this heat shrink tubing?
  • Very high shrink ratio accommodates large connectors and bulky cables.
  • Lined with a hot melt adhesive for extra protection.
  • Conforms to UL94V-0 Standards of flammability and MIL-DTL-23053/15, Class 1 specifications for adhesive lined heat shrink tubing
As Low As: $24.31 per 4 Foot Sectionpricing table below


Products
Features
Resources
Video
Part #
Nominal Size
BeforeAfter
BlackClearRedOrangeYellowGreenBlueVioletGreyWhiteLengthPrice/4ft Section
nspa-hst680b-480.750"0.125"$24.31 per 4ft Section
nspa-hst681b-481.300"0.220"$45.72 per 4ft Section
nspa-hst682b-481.750"0.290"$55.04 per 4ft Section
nspa-hst683b-482.000"0.330"$71.66 per 4ft Section
nspa-hst684b-482.750"0.460"$130.25 per 4ft Section
nspa-hst680b-480.750"0.125"$24.31 per 4ft Section
nspa-hst685b-483.500"0.673"$225.60 per 4ft Section
nspa-hst686b-484.700"0.900"$330.47 per 4ft Section
  • Available in black only to provide UV resistance
  • 7 sizes available to meet all heat shrinking needs including
    • Sealing multiple wires
    • Splicing or joining wire
    • Providing strain relief on cables
    • Cables and connectors that are extremely different in size and shape
  • Adhesive and strong polyolefin tubing combine to create a puncture resistant seal
  • Operating temperature from -55 to 110C (67 to 230F) to withstand harsh environments
  • Tensile strength of 2100 PSI for strain relief
View Specifications

High Ratio Heavy Wall Technical Specifications

 

 

MIL SPECS UL CSA MATERIAL RECOVER TEMP. CONTINUOUS OPER. TEMP. FLAMMABILITY
MIL-DTL-23053/15, Class 1 - - Polyolefin 120°C (248°F) -55°C to 110°C (67°F to 230°F) Flame Retardant Meets UL-94, V-0 Flame Rating

 

View Measurement Conversion Chart

6:1 heat shrink dimension

ORDER REF. NO. METRIC / IMPERIAL EXPANDED RECOVERED LENGTHS
INTERNAL DIAMETER (MIN) D (mm/in) INTERNAL DIAMETER (MAX) d (mm/in) WALL THICKNESS (MIN) W (mm/in) METRIC IMPERIAL
0190 / 0750 19.0 / 0.750 3.2 / 0.125 3.2 / 0.123 121cm 48"
0330 / 1300 33.0 / 1.300 5.5 / 0.220 3.4 / 0.135 121cm 48"
0444 / 1750 44.4 / 1.750 7.4 / 0.290 3.6 / 0.140 121cm 48"
0508 / 2000 50.8 / 2.000 8.3 / 0.330 4.3 / 0.170 121cm 48"
0698 / 2750 69.8 / 2.750 11.7 / 0.460 4.8 / 0.190 121cm 48"
0889 / 3500 88.9 / 3.500 17.1 / 0.673 4.3 / 0.170 121cm 48"
1194 / 4700 119.4 / 4.700 22.9 / 0.900 4.8 / 0.190 121cm 48"
 
PROPERTY
TEST METHOD
TYPICAL PERFORMANCE
Physical
Tensile Strength ASTM D412, ISO 037 2100 psi (14.5 MPa)
Elongation ASTM D412, ISO 037 600%
Elongation after Heat Aging (168 hrs at 150°C) ASTM D2671 400%
Heat Shock (4 hrs at 225°C) ASTM D2671 No cracking or flowing
Longitudinal Change ASTM D2671 +1%, -10%
Low Temperature Flexibility (4 hrs at -55°C) ASTM D2671 No cracking
Specific Gravity ASTM D792 1.10
Hardness (Shore D) ASTM D2240 500
Electrical
Dielectric Strength ASTM D149, IEC 243 500 V/MI (20 KV/mm)
Dielectric Voltage Withstand (2500 V, 60 Hz, 1 min) UL 486D No breakdown
Volume Resistivity ASTM D257 1016 ohm-cm
Chemical
Fluid Resistance MIL-DTL-23053 Good to excellent
Fungus Resistance ASTM G21 No growth
Copper Corrosion ASTM D2671 No corrosion
Water Absorption ASTM D570 0.1%
Adhesive
Adhesive Lap Sheer (1 in/min at 23°C) ASTM D1002 125 ps (.875 Mpa)
Adhesive Softening Point ASTM E28 92°C/-5°C
Adhesive Peel Strength (300 in/min at 23°C) • to steel, aluminum, P. E. • PVC ASTM D1000 35 pli 20 pli
Adhesive Blocking (30°C) ASTM D1146 No blocking
Water Penetration STM 706 No penetration after 236 hrs of continuous immersion
Shop With Confidence
We accept Visa, Master Card, American Express, Discover, and PayPal This shopping cart employs the highest industry strength security: 256 bit SSL
© 2012 HeatShrinkSupplies.com. All Rights Reserved. Yahoo! Store by Solid Cactus